Now in its third series, Mark-UNO was the
first LASER-welder which truly deserves the
title of ‘compact’ welding device, due to the
fact it can be placed over a bench or hang
to a wall.
In addition to offering best performance, a
high production capacity and a compact size,
constant research for new solutions has led
to the introduction of new features such as:
A new operator-machine interface, which,
by means of a color touch-screen display,
allows fast access to working parameters
and easy management of options.
A USB PenDrive, which, in addition to be
the "Black Box" of the LASER-welder, makes
it possible to save working parameters and
perform software upgrades.
100 memory cells to save work settings.
5 pre-set waveforms (pulse-shaping) to
obtain higher quality welding on all types of
A LED-type lighting system coaxial to the
LASER-aperture inside the welding
Access and adjustment of all LASER
functions through a rotary-switch inside the
OBC - On Board Camera (Optional) Supplementary image viewing-thru
system at welding, positioned coaxial to
the stereo microscope and to the LASER
aperture. It allows images originated at
welding inside the chamber to be viewed
on an integrated color monitor,
connected to a HD video camera with a
dedicated video output.
Welding spot diameter Ř 0.1mm Thanks to a particularly sophisticated
system the SSCS patented by OROTIG
- it's possible to focus the LASER-beam
on very small welding spots, as
diminutive as Ř 0.1mm (under certain
limits of set working parameters)
Large and Spacious Welding chamber Spacious, free and comfortable. The
special "tilt" structure of the Mark-UNO's
welding chamber has been designed to
facilitate welding and to allow the
introduction of big objects, even large
Attachment on Wall / Opened Chamber (Optional) The Mark-UNO is fitted with a special support
system which allows it to be hang to a stand.
Additionally, once so positioned, the base of
its welding chamber can be removed so to
increase the available space for LASERwelding.
This solution has been designed to
meet the demand of those operators needing
to weld objects particularly large in volume.
Smart Service - USB Data Storage Storage of all vital machine information. A
system which facilities the identification of
and solution to eventual problems, and the
execution of software upgrade.
The flow of Argon gas directly onto the welding area and co-axially to the LASER-aperture with the
possibility to set different post-gas and pre-gas timings.
Powerful and silent hydraulic cooling circuit designed to support very intensive working cycles.
Motorized regulation of welding spot diameter.
Only 0.1 mm in diameter of the minimum spot, thanks to the optionally provided OROTIG’s
patented "Spot Size Control System" (SSCS).
Optionally provided OROTIG’s patented OBC (On Board Camera) system to allow watching on a
8.4” colour monitor the images of welding inside the chamber and, by the touch of a finger, to
alternate the reading of all working parameter settings and/or operator-machine messaging on
the TFT colour display.
All these new features translate into more available power, energy, compactness, reliability and
simplified equipment’s management and maintenance.
Single-phase, 230VAC (+ -) 10% 50/60Hz, 10A
Type of crystal
7mm Nd:YAG @ 1064 nm
Power Pulse and time
130 Joule at 25mS
Average Power, W
Frequency of Repetition, Hz
From 0,1 - 2,0 mm
External by 5.7”/8.4” touch-screen colour display
Internal by joystick
10X at 45° binoculars and cross-hair pointer by LEICA
Dimensions (W x D x H)
48 x 78.5 x 51 cm
Air/Liquid, a 2=litre closed-circuit with dedicated heat-exchanger,